Disk

Expand the filesystem after fresh installation

raspi-config - Advanced - Expand Filesystem

Delete docs to get more disk space

sudo rm -rf /usr/share/doc/
sudo rm -rf /usr/share/man/
sudo rm -rf /usr/share/locale/

APT

apt-get update
#apt-get upgrade
#or better
apt-get full-upgrade

Shrink journal

journalctl --vacuum-size=20M
journalctl --vacuum-time=3d

View packages

dpkg-query -Wf '${Installed-Size}\t${Package}\n' | sort -n

Remove and clean

apt-get remove libraspberrypi-doc --purge
apt-get clean
apt-get purge
apt autoremove

Good on Debian 11 Bullseye

apt-get remove firmware-libertas --purge
apt-get remove firmware-atheros --purge
apt-get remove rpi-eeprom --purge
apt-get remove gcc-10 --purge
apt-get remove iso-codes --purge
apt-get remove cpp-10  --purge
apt-get clean
apt-get purge
apt autoremove

root@raspberrypi:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root       1.6G  1.3G  177M  89% /
devtmpfs        776M     0  776M   0% /dev
tmpfs           937M     0  937M   0% /dev/shm
tmpfs           375M  1.7M  373M   1% /run
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1  253M   49M  204M  20% /boot
tmpfs           188M     0  188M   0% /run/user/1000

Install additional packages needed for this project

apt-get install mc autofs iptraf samba samba-common nftables apache2 locate tcpdump ncdu
apt-get install hostapd wireless-tools dnsmasq iw bridge-utils cloud-utils lsof nmap tcpdump

Apapter

Turn on WiFi and leave Bluetooth off

root@raspberrypi:~# rfkill unblock 0
root@raspberrypi:~# rfkill block 1

root@raspberrypi:~# rfkill
ID TYPE      DEVICE      SOFT      HARD
 0 wlan      phy0   unblocked unblocked
 1 bluetooth hci0     blocked unblocked

sysctl

/etc/sysctl.conf

net.ipv4.ip_forward=1

Activate

sysctl -p

User/Group

addgroup sambagrp
usermod -a -G sambagrp pi

Samba

Set a password for the pi user

smbpasswd -a pi

/etc/samba/smb.conf

[global]
 workgroup = WORKGROUP
 server string = %h server (Linux)
 #interfaces = eth0
 bind interfaces only = yes
 log file = /var/log/samba/log.%m
 panic action = /usr/share/samba/panic-action %d
 server role = standalone server
 obey pam restrictions = Yes
 passwd program = /usr/bin/passwd %u
 passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
 pam password change = Yes
 map to guest = Bad User
 #log level = 4 #To be used for debugging purposes
 local master = no
 disable netbios = yes

[automnt]
 comment = automnt
 path = /automnt
 valid users = @sambagrp
 browsable = yes
 writable = yes
 read only = no
 create mask = 0660

Enable and start smbd, disable nmbd

systemctl enable smbd 
systemctl restart smbd 
systemctl stop nmbd
systemctl disable nmbd
systemctl mask nmbd

AUTOFS/UDEV

Story about shutting down Raspi: https://raspberrypi.stackexchange.com/questions/50345/is-it-okay-to-just-pull-the-plug
Add config file for our usb sticks

touch /etc/auto.rbusb

Add to the end of auto.master

echo '/automnt /etc/auto.rbusb --timeout=5 --ghost' >> /etc/auto.master

Restart

systemctl restart autofs

Get autofs helper script (automount helper, auto shutdow on usb flash device)

wget https://coolgeo.org:/download/scripts/autofs-config.pl -O /usr/local/bin/autofs-config.pl
chmod u+x /usr/local/bin/autofs-config.pl

Add udev rule

echo 'ACTION=="add", SUBSYSTEM=="block", KERNEL=="sd*", ATTRS{vendor}=="*", RUN+="/usr/bin/perl /usr/local/bin/autofs-config.pl"' > /etc/udev/rules.d/90-local.rules

Reload udev

udevadm control --reload-rules && udevadm trigger

TEST USB

Apache2/WebDAV

/etc/apache2/sites-available/000-default.conf

DavLockDB /var/www/DavLock
<Directory "/automnt/">
 Options +Indexes
 Order allow,deny
 Allow from all
 Require all granted
</Directory>
<VirtualHost *:80>
   ServerAdmin webmaster@localhost
   DocumentRoot /automnt
   Alias /automnt /automnt
   <Directory /automnt>
    DAV On
   </Directory>
   <Directory "/automnt">
    AuthType Basic
    AuthName "Restricted Content"
    AuthUserFile /etc/apache2/.htpasswd
    Require valid-user
   </Directory>
</VirtualHost>

Enable WebDAV Mod

a2enmod dav_fs

Restart

systemctl restart apache2

Add the PI user to WebDAV

htpasswd -c /etc/apache2/.htpasswd pi

HOSTS

/etc/hosts

192.168.4.1     raspi raspberry raspberrypi raspap

INIT

/etc/systemd/system/rbinit.service

[Unit]
Description=RaspiMobile Init Script
After=network.target

[Service]
Type=oneshot
ExecStart=/usr/sbin/rbinit

[Install]
WantedBy=multi-user.target

/usr/sbin/rbinit

#!/bin/bash
#Workaround for Ipdads
/sbin/ip addr add 192.168.5.1/24 dev eth0:0
/sbin/nft -f /etc/nftables.conf

Apply the new init script

chmod 755 /usr/sbin/rbinit
systemctl enable rbinit.service
systemctl start rbinit

NFT

/etc/nftables.conf

#!/usr/sbin/nft -f

flush ruleset

table inet filter {
       chain input {
               type filter hook input priority 0; policy accept;
       }
       chain forward {
               type filter hook forward priority 0; policy accept;
       }
       chain output {
               type filter hook output priority 0; policy accept;
       }
}
table ip nat {
       chain PREROUTING {
               type nat hook prerouting priority -100; policy accept;
       }

       chain INPUT {
               type nat hook input priority 100; policy accept;
       }

       chain POSTROUTING {
               type nat hook postrouting priority 100; policy accept;
               oif "eth0" masquerade comment "masq for eth0"
               oif "wlan0" masquerade comment "masq for wlan0"
       }

       chain OUTPUT {
               type nat hook output priority -100; policy accept;
       }
}

Apply

systemctl enable nftables
systemctl start nftables

DHCPCD

/etc/dhcpcd.conf

hostname
clientid
persistent
option rapid_commit
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
option ntp_servers
require dhcp_server_identifier
slaac private
nohook lookup-hostname

#wlan0 configuration
interface wlan0
static ip_address=192.168.4.1/24
static routers=192.168.4.1
gateway

Apply changes

systemctl daemon-reload
systemctl restart dhcpcd.service

DNSMASQ

/etc/dnsmasq.d/090_wlan0.conf

#---------------------------------------------------------
#Raspi-Mobile wlan0 configuration
interface=wlan0
dhcp-range=192.168.4.50,192.168.4.255,255.255.255.0,30d 
#---------------------------------------------------------

Apply

systemctl enable dnsmasq
systemctl restart dnsmasq

HOSTAPD

/etc/hostapd/hostapd.conf

driver=nl80211
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
auth_algs=1
wpa_key_mgmt=WPA-PSK
beacon_int=100
ssid=raspi-mobile
channel=1
hw_mode=g
ieee80211n=0
wpa_passphrase=raspberry
interface=wlan0
wpa=2
wpa_pairwise=CCMP
country_code=DE
ignore_broadcast_ssid=0

Apply

systemctl unmask hostapd
systemctl enable hostapd
systemctl restart hostapd

Workaround if hostapd does not start

/etc/systemd/system/rbautostart.service

[Unit]
Description=RaspiMobile automatic tasks at startup only
After=network.target auditd.service

[Service]
Type=oneshot
ExecStart=/usr/sbin/rbautstart

[Install]

/usr/sbin/rbautstart

#!/bin/bash

#restart hostapd at startup
systemctl restart hostapd

WiFi Scan

Check your neighbourhood

iwlist wlan0 scan

Disable syslog

Save disk space and avoid corruptions on the sd card

systemctl stop syslog.socket rsyslog.service
systemctl disable syslog.socket rsyslog.service

Optional keepalive logging

This is simple logging script to see if the device is up and write into syslog

root@raspberrypi:/# cat /home//pi/rbkeepalive.sh
#!/bin/bash
backup_time=$(date +'%H:%M:%S')
log_date=$(date +'%Y%m%d')
backup_dir="/tmp/"
alive_suffix="-alive.txt"
echo "$backup_dir$log_date$alive_suffix Keepalive $backup_time" >> $backup_dir$log_date$alive_suffix

Perms

chmod 755 /home//pi/rbkeepalive.sh

Crontab, all 10 Minutes

root@raspberrypi:/# crontab -l | grep rbkeepalive.sh
*/10 * * * * /home/pi/rbkeepalive.sh

RaspAP

https://raspap.com/#quick
Set the WiFi country in raspi-config's Localisation Options:

raspi-config

Invoke RaspAP's Quick Installer:

curl -sL https://install.raspap.com | bash

Configure Website, for port 8080 and set the pi user as admin

OnetTime Disk Expand

/etc/systemd/system/rbexpanddisk.service

[Unit]
Description=RaspiMobile one time disk expand
After=network.target

[Service]
Type=oneshot
ExecStart=/usr/sbin/rbexpand

[Install]
WantedBy=multi-user.target

Enable the one time service

root@raspberrypi:~# systemctl enable rbexpanddisk

/usr/sbin/rbexpand

#!/bin/bash
#Script to expand the Raspi filesystem. The script checks for the file /tmp/raspi-mobile and will run if the file exists.
#After the first run the script will disable its own service (rbexapnd.service) and delete /tmp/raspi-mobile
PATH=/sbin:/usr/sbin/:/usr/local/sbin:/bin:/usr/local/bin:/usr/bin:
declare LS="Raspi-Mobile:"  #LS = LogSuffix
declate TriggerFile="/tmp/raspi-mobile"
if [ -f $TriggerFile ]; then
 systemctl enable syslog.socket rsyslog.service
 systemctl start syslog.socket rsyslog.service
 logger "$LS Start expanding disk"
 logger "$LS growpart /dev/mmcblk0 2"
 growpart /dev/mmcblk0 2 | logger
 logger "$LS resize2fs /dev/mmcblk0p2"
 resize2fs /dev/mmcblk0p2 | logger
 logger "$LS Disable rbexpand"
 systemctl disable rbexpand.service | logger
 rm $TriggerFile >/dev/null 2>&1
 logger "$LS Disable syslog"
 systemctl stop syslog.socket rsyslog.service | logger
 systemctl disable syslog.socket rsyslog.service | logger
else
 logger "$LS Expanding is disabled"
fi

chmod u+x /usr/sbin/rbexpand
systemctl daemon-reload
systemctl enable rbexpanddisk
touch /tmp/raspi-mobile

Features

Neofetch Banner

apt-get install neofetch
bash -c $'echo "neofetch" >> /etc/profile.d/mymotd.sh && chmod +x /etc/profile.d/mymotd.sh'

Add to /etc/profile.d/mymotd.sh

echo "See here too: https://coolscript.org/index.php/Raspi-Mobile"

RaspAP

curl -sL https://install.raspap.com | bash

Last Step

Last step is to delete the logs and shut down

systemctl stop autofs.service
systemctl stop apache2 nmbd smbd
rm /etc/auto.rbusb
touch /etc/auto.rbusb
rm  -rf /var/log/apache2/*
rm  -rf /var/log/samba/*
rm  /var/log/*
history -c
systemctl stop autofs
cd /automount
echo "###########"
echo " POWER OFF" 
echo "###########"
init 0

bashrc

# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
case $- in
   *i*) ;;
     *) return;;
esac

# don't put duplicate lines or lines starting with space in the history.
# See bash(1) for more options
HISTCONTROL=ignoreboth

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize
 
# If set, the pattern "**" used in a pathname expansion context will
# match all files and zero or more directories and subdirectories.
#shopt -s globstar
 
# make less more friendly for non-text input files, see lesspipe(1)
#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"

# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
    debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
    xterm-color|*-256color) color_prompt=yes;;
esac

# uncomment for a colored prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the prompt
force_color_prompt=yes

if [ -n "$force_color_prompt" ]; then
   if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
       # We have color support; assume it's compliant with Ecma-48
       # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
       # a case would tend to support setf rather than setaf.)
       color_prompt=yes
   else
       color_prompt=
   fi
fi

if [ "$color_prompt" = yes ]; then
   PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w \$\[\033[00m\] '
else
   PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt

# If this is an xterm set the title to user@host:dir
case "$TERM" in
xterm*|rxvt*)
   PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
   ;;
*)
   ;;
esac

# enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
   test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
   alias ls='ls --color=auto'
   #alias dir='dir --color=auto'
   #alias vdir='vdir --color=auto'

   alias grep='grep --color=auto'
   alias fgrep='fgrep --color=auto'
   alias egrep='egrep --color=auto'
fi

# colored GCC warnings and errors
#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'

# some more ls aliases
#alias ll='ls -l'
#alias la='ls -A'
#alias l='ls -CF'

# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.

if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if ! shopt -oq posix; then
 if [ -f /usr/share/bash-completion/bash_completion ]; then
   . /usr/share/bash-completion/bash_completion
 elif [ -f /etc/bash_completion ]; then
   . /etc/bash_completion
 fi
fi

Beta OpenVPN

Need NFT

table ip nat {
      chain PREROUTING {
              type nat hook prerouting priority -100; policy accept;
      }

      chain INPUT {
              type nat hook input priority 100; policy accept;
      }

      chain POSTROUTING {
          type nat hook postrouting priority 100; policy accept;
          iifname "eth0" counter oifname "tun0" masquerade  comment "masq for eth0"
          iifname "tun0" counter oifname "tun0" masquerade  comment "masq for eth0"
          iifname "wlan0" counter oifname "tun0" masquerade  comment "masq for eth0"
      }

      chain OUTPUT {
              type nat hook output priority -100; policy accept;
      }

Neet openvpn add on

auth-user-pass /etc/openvpn/login.conf
#route 0.0.0.0 0.0.0.0
log /var/log/openvpn.log
verb 6
redirect-gateway autolocal

Model3 vs Model4

Model4

root@raspberrypi:~# lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Vendor ID: ARM
Model: 3
Model name: Cortex-A72

Modell 3

root@raspberrypi:~# lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Vendor ID: ARM
Model: 4
Model name: Cortex-A53

Function Test

Plugin Media USB Stick, check automount
Wlan connect
Connect Ethernet
Test Internet
Test RaspAP Web
Connect (samba) via local ip and hostname (raspi)
Connect (webdav) via local ip and hostname (raspi)
Connect (sftp) via local ip and hostname (raspi)
Disconnect Ethernet
Connect (samba) via hostname (raspi)
Connect (webdav) via hostname (raspi)
Connect (sftp) via hostname (raspi)
Test Auto Shutdown USB Stick

Setup-Raspi-Mobile

Contents

Disk

APT

Apapter

sysctl

User/Group

Samba

AUTOFS/UDEV

Apache2/WebDAV

HOSTS

INIT

NFT

DHCPCD

DNSMASQ

HOSTAPD

WiFi Scan

Disable syslog

Optional keepalive logging

RaspAP

OnetTime Disk Expand

Features

Last Step

bashrc

Beta OpenVPN

Model3 vs Model4

Function Test

Navigation menu