Raspi-Mobile
Intro
Raspi-Mobile is designed to run as a Mobile Device together with your Tablet or Laptop, prepared for conditions such as in a Train, Flight, Hotel and so on.
The project has its focus to run as a Streaming Server next to common features like Wireless and Internet-Routing support.
Two major Raspberry/Linux issues are solved:
- True automatic mounting of USB flush drives
- Plugin any USB sticks, supporting the filesystems ntfs, vfat and exfat
- Graceful shutdown
- This solves the issue of preventing disk damages in case of losing electricity power.
- No need to login or connecting a keyboard and monitor to shutdown, just plugin the shutdown usb device to initiate a graceful shutdown
Features
- Support Raspberry3 or Raspberry4. The project was developed with Raspberry4 on Debian Buster
- Slim image file download, the image size is less than 2GB
- Easy to setup
- Automatic mounting and un-mounting USB flash drives
- Supported file systems: ntfs,ext32 and vfat
- Graceful shutdown using a special prepared USB flash drive labeled with RASPI-CLEAN-SHUTDOWN
- Wireless support, the device has a mangement web to customize WiFi settings like SID and password
- Routing support together with ethernet connectivity, all interfaces are using DHCP
- Support OpenVPN
- Support of common protocols for streaming:
- SMB/CIFS
- WebDav
- SFTP
- HTTP
Easy Installation
- Get the 2GB image here
- Write the image to a Micro SD Card with the size of equal or better greater than 2GB
- To write the Image you may use tools like DiskImager
- Insert the Micro SD Card to your Raspberry and start it
- If the Micro SD Card is greater then 2GB then login ssh, become root and run raspi-config, goto advanced and then expand filesystem, finish and reboot
- Installation finished
Default Username and Password
- Username pi
- Password raspberry
Hostname and Aliases
Available ONLY when connected through WiFi
- Hostname raspberrypi
- Aliases
- raspi
- raspberry
- IP (alias to eth0, works even if eth0 is disconnected)
- 192.168.5.1
SSH
ssh pi@raspi ssh pi@192.168.5.1
- Become root
sudo -i
Wireless default access
- WiFi SID
- Raspi-Mobile
- WiFi Passwd
- raspberry
- RaspAP Web-Interface
http://raspi:8080 http://192.168.5.1:8080
Change password for the pi user
Connect using SSH
Change the Linux Password
ssh pi@raspi
OR
ssh usernanme@raspi
- Type
pi@raspberrypi:~ $ sudo -i root@raspberrypi:~# passwd pi New password: Retype new password: passwd: password updated successfully
Change the SMB/CIFS Password
This might need a new windows login
pi@raspberrypi:~ $ sudo -i root@raspberrypi:~# smbpasswd pi New SMB password: Retype new SMB password: